LaView Cube Series, User Manual

Page: 29 / 73

User Manual of Cube DVR Series
28
Network status: Display the current DHCP PPPoE and IP.
Figure 3.16
Push
P2P
Figure 3.17
Network
Item Description
[Enable] Enable P2P by clicking OPEN, and click OK to finish the device configuration
[Transfer Mode] Fluency/Latency/None
[Device ID] Each serial number Of devices are different, this cannot be modified
[Password] This is generated by the system, you can change it
[Local Port]: Default is 3000, can be modified
[State] Check the connect status of the device and the server
Remark When it shows Offline, click
【
Ping
】
to check the connect status again
Note : If the status still shows offline, please check the if the network light is on, and the device is connected or not.