LaView Cube Series, User Manual

Page: 28 / 73

User Manual of Cube DVR Series
27
【
Max Connect
】
【
Transfer Capability Set
】
range: 0-10, 0 indicates that no connections are allowed
【
Network Connection
NUM
】
0-32 should be proper. Need Check first then browse real time video on the network, the number
of connections depending on network bandwidth, the greater the number, the greater the network
load, the impact of video playback smooth
The automatic setting adjusts these settings based on available network resources.
【
Speedy online download
】
0-8 should be proper.
【
Network Transmission
QOS
】
Fluency priority or Picture Quality priority or self-adaption according to the setting, the network
automatically adjusts the stream.
【
Speedy online download
】
if enabled, speed is 1.5-2 times to normal speed
【
HTTP
】
default: 80
【
TCP
】
default: 8000, variable
【
UDP
】 default: 8001, variable
【
UPnP
】
Protocol on the router automatically open port mapping, make sure UPnP feature is enabled on
the router
【
Multicast
】
tick “Multicast” and set a group in “Set”, IP should be limited as follow picture, port no limit
【
Email
】
Set the sender mailbox SMTP server IP address, port, username, password and sender‟s mailbox,
mail SSL Encryption.Email title support Chinese, English and Arabic numerals input, Max input
32 characters. Max support 3 Receive Addresses and SSL Encryption Mailbox.
【
FTP
】
Tick “FTP” and click “Set
Set FTP server IP address, port and destination folder. System will create folders by IP, time and
channel if there is no remote folder specified.
FTP username and password
Set a maximum file size, channel, time, type and etc.
Set FTP file length. Upload the whole record if the file length is smaller than setting; leave out
the exceed part if the file length is exceed the setting; 0 refers to uploading the entire record in
any condition.
Set up to two time periods and choose from 3 different record types for channels
【
Alarm Center
】
reserved interface
【
Push
】
Push service and premium version of the Iphone client, the operating interface is mainly used to
push the opening of the service function, the current mobile client associated with the hard disk
video recorder, even in the case of mobile client did not open, a local of real-time alarm message
will be sent to the Iphone for customer inquiries.