User Manual of Cube DVR Series
9
1.6.
Power ON/OFF
1.6.1.
Power On
DVR installed correctly, switch on with power light is on, DVR will boot up automatically. Different model have different boot up
status, please refer to the Front-panel Introduction.
DVR will detect the hardware when power on, the process will last 20 seconds more or less. After the detection, DVR make a
“Buzzing” sound and enter into a multi-screen live view, user can operate now. Please refer to XXX. Main Menu Introduction and
Other Introduction.
If recording time contains power up time, DVR will automatically start timing recording when power on.
Figure1.3
Diagram
Note: Power supply has to match with DVR, any other substitutes are not allowed.
1.6.2.
Power OFF
Hold down on-off key to turn off device.
【
Main Menu
】
→
【
Power off
】
→
【
Power off
】
.
Summary of Contents for Cube Series
