Laversab 6300-M3 Rev C3, User Manual

Page: 38 / 72

31
1:02 (2 seconds after the elapsed time reaches the first leak-time) , the leak screen will be
updated and appear as shown below. The second line shows that at the end of 1 minute the
knots value leaked to 99.5 knots and the accumulated leak in 1 minute was -0.5 knots, since
the knots value at the start of the leak check was 100 knots. The second line also shows that at
the end of 1 minute, the altitude was at 14965 feet and the accumulated leak in 1 minute was -
35 feet, since the altitude was at 15000 feet at the start of the leak check.
99.5 knots -33 ft/min. 14964 feet
1m: 99.5 / -0.5 14965 / -35
2m:
3m: 1:02
When the elapsed time reaches 2:02, the leak screen is updated again. The third line shows
that at the end of 2 minutes the knots value leaked to 99.1 knots and the accumulated leak in 2
minutes was -0.9 knots, from the start value of 100 knots. The third line also shows that at the
end of 2 minutes, the altitude was at 14932 feet and the accumulated leak in 2 minutes was -68
feet, from the start value of 15000 feet.
99.1 knots -30 ft/min. 14931 feet
1m: 99.5 / -0.5 14965 / -35
2m: 99.1 / -0.9 14932 / -68
3m: 2:02
When the elapsed time reaches 3:02, the leak screen is updated again. The fourth line shows
that at the end of 3 minutes the knots value leaked to 98.8 knots and the accumulated leak in 3
minutes was -1.2 knots, from the start value of 100 knots. The fourth line also shows that at
the end of 3 minutes, the altitude was at 14905 feet and the accumulated leak in 3 minutes was
-95 feet, from the start value of 15000 feet.
98.8 knots -27 ft/min. 14904 feet
1m: 99.5 / -0.5 14965 / -35
2m: 99.1 / -0.9 14932 / -68
3m: 98.8 / -1.2 3:02 14905 / -95
After the 4 th line is updated, the leak screen will continue to update the current Actual
values on line 1 and the elapsed time on line 4. The remaining information will remain
unchanged so that the user can note down the values at a later time, before exiting the leak
screen.