LAVAZZA LB2300 SINGLE CUP Maintenance Manual For Technical Assistance Download Page 17

Page: 17 / 74

BUTTON

DESCRIPTION

2) Enter/Confirm

Press the button to select the function or confirm the command.

6) Page UP

Press the button to change function or parameter.

8) ESC

Press the button to exit the function.

9) Page DOWN

Press the button to change function or parameter.

DISPLAY

MEANING

ACTIONS

The machine is checking the components. Wait for the check to conclude automatically.

The machine is warming up

Wait for this step to conclude automatically.

The machine is performing the circuit

rinse cycle with fresh water.

Wait for the rinse cycle to end automatically.

The machine is ready to brew coffee.

It is possible to dispense the coffee/product.

The capsule loading tray has been opened. Place a capsule in the tray and close it.

Close the tray without the capsule.

6.1. Machine warnings

Manual code 10083445 / Rel. 0.00 / April 2010

Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312

Summary of Contents for LB2300 SINGLE CUP











































































Search results

Summary of Contents for LB2300 SINGLE CUP

Reviews:

Related manuals for LB2300 SINGLE CUP

Brands by name

Popular brands

LAVAZZA LB2300 SINGLE CUP, Maintenance Manual For Technical Assistance

Search results

Summary of Contents for LB2300 SINGLE CUP

Reviews:

Related manuals for LB2300 SINGLE CUP

Brands by name

Popular brands