1.2.
Setup
1.2.7.Credits
1.2.7.1.Credit check
(Read only)
Yes
: the machine checks the remaining credits.
No
: The machine does not check remaining credit.
1.2.7.2.Credit warning
Default: Yes
“Yes” enables
- display of the credit alarm signal when the
preset minimum number of credits is rea-
ched;
- display of the "no credit" alarm signal
when the credits have been run out
1.2.7.3.Load credits
Default: 000
Number of credits added.
Value: 0-255
1.2.8.Language
Default: Italian
Select language
1.2.9.Grounds delay
Default: 5
Time, in seconds, after which the machine
resets used capsule counter (with the used
capsule drawer removed)
this delay applies only if the relevant alarm
signal is shown.
After this time the warning or the alarm
signal is cancelled.
Values: 0 - 255 seconds
1.2.10. Contrast
Default: 35
To set the display contrast
Values: 20 - 50
1.2.11 Brightness
Default: 150
To set the display brightness
Values: 30 - 255
1.3. Stand-by
1.3.1. Activate?
Default: No
“
Yes
” enables energy saving mode.
1.3.2.
Stand-by delay
Default: 60
- When the machine is in standby mode, it
switches off automatically after the defined
time has elapsed following the last use.
- When the machine is in standby mode, the
boiler temperature is reduced after the defi-
ned time has elapsed
Values: 5 - 240 Minutes
17
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
