1. Programming menu
Press ENTER to access the programming menu
Password
Enter password
Set value
Default: 0000
Enter the previously stored password (4 digits)
for accessing the password function
1.1.
Identification
1.1.1. Admin/affiliate PIN
Default 00000
Identifies the Service Provider or Administratorʼs
code: Numerical value between 0 and 65535
1.1.2. Model
(Read only) Identifies the machine model.
1.1.3. Version
(Read only) Identifies the version of the machi-
neʼs software.
1.1.4. Point of sale
Default 00000
Identifies the point of sale: Numerical value bet-
ween 0 and 65535. Enter the selected number.
This number will then be
displayed.
1.2.
Setup
1.2.1.
Standard temperature
Default: 100°C
Boiler operating temperature (in degrees centi-
grade) when the machine is ready to be used.
Range: 90° - 105°.
1.2.2.Progr.dose
1.2.2.1.Short prod.dose
Default: 140
Quantity for espresso coffee (this is a numerical
parameter with no physical correspondent, e.g. cc).
1.2.2.2.Long prod. Dose
Default 173
Quantity for long coffee (this is a numerical para-
meter with no physical correspondent, e.g. cc).
1.2.2.3.Free prod.dose
Default 615
Maximum amount of manually dispensed product
(this is a numerical parameter with no physical cor-
respondent, e.g. cc).
1.2.2.2.Double dose
prod.dose
Default 210
Quantity for double espresso coffee (this is a
numerical parameter with no physical correspon-
dent, e.g. cc).
1.2.3.Pre-infusion
Default: Media
Pre-infusion time
No, Short, Medium, Long
1.2.4.Filter coffee
Default: No
“
Yes
” enables the filter coffee function. Filter
coffee can only be brewed by pressing “
ESC
”.
The filter operation is not available.
1.2.5.
Descaling
1.2.5.1. Water hardness
Default: 3
Values 0-4. “
0
” disables descaling checks. With
hardness 1, 2, 3 and 4, descaling checks are
activated and an alarm signal will appear after
240, 180, 120 or 60 litres of water that have
been treated. (Values from 5 to 9 will not be
accepted)
1.2.5.2. Descal.warning
Default: Yes
“
Yes
” enables display of the descaling alarm
signal.
1.2.6.
Filter warning
Default: No
“
Yes
” enables display of the filter replacement
alarm signal. When enabled, the alarm signal
appears after approximately 60 litres of water
have been treated, or in any event after 60 days.
6.4. Table of programming menu
16
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
