2. GENERAL SAFETY RULES
Attention
During the repair of the machine all the normal
safety protections, designed to avoid accidents
are disabled. Adopt all the measures necessary
to avoid accidents.
• Power connection should be made in compliance
with local standards in force.
• The electric socket connecting the machine should:
- conform to the type of plug installed on the machine;
- comply with the data provided on the plate placed on
the bottom of the apparatus;
- be connected to ground.
• The electric parts of the machine must not:
- enter into contact with any type of liquid: danger of
electric shock and/or fire;
- be manipulated by humid or wet hands;
- be tampered with.
• It is forbidden:
- To use the machine near flammable substances
and/or explosives and/or in an atmosphere with any
risk of fire;
- To use spare parts not advised by the manufacturer;
- Carry out any type of technical modification not cove-
red in the normal procedures of diagnosis and repair.
• Before carrying out any operation on the machine
ensure that the plug is disconnected from the current
and that the machine has cooled.
• Maintenance operations on the machine should be
carried out by a single person; if a second person
must intervene, this person should be advised of the
potential hazards relevant to the operation underway.
• In case of fire use carbon dioxide (CO2) extingui-
shers. Do not use water or powder extinguishers.
Attention
Read the entire manual carefully and the follo-
wing general safety rules..
2.1. Stop functions
To stop the machine turn the main switch to “0” (OFF).
2.2. Safety devices
Two Klixon thermostats
with manual reset avoid any
overheating of the boiler.
2.3. Residual risks
In this chapter are illustrated the risks that the user may
incur in if he doesn’t comply with the specific safety
rules (as described in this booklet).
The appliance must be connected to ground
If it is not done, the appliance can become a source of
dangerous electrical discharges as it is no longer able
to discharge electricity to earth.
Do not use running water for washing
The use of pressurised water directly on the machine
can seriously damage electrical appliances. Never use
water jets to wash any part of the appliance.
Be careful with the hot water pipe
During use the hot water pipe may overheat, thus
becoming a source of danger. Handle this part care-
fully. Never direct steam or hot water jets directly on
parts of the body.
Do not work on the machine when it is powered
Before carry out any maintenance or repair on the
machine you must turn it off by means of the main net-
work switch, or better yet, disconnecting the connec-
tion terminals in the network. Never remove any body
panels when the machine is supplied with electrical
power.
Note
The machines described in this publication, are
designed in compliance with the specific European
standards in force and therefore have measures of
protection in all the potentially hazardous parts.
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
Manual code 10083445 / Rel. 0.00 / April 2010
6
