8 USER'S
MANUAL
554515_A_PUB_DATE_1_FEB_2014.DOC
4. OPERATION INSTRUCTION
4.1. BEFORE WASHING
Sort the linen according to temperature and instructions determined by fabric manufacturer. Check if there
aren‘t any strange objects between the linen like nails, screws, needles, etc. to prevent the washer-extractor
or linen damage. Turn sleeves of shirts, blouses, etc. inside out. To get a better washing result mix the bigger
and smaller pieces of linen and put them into the washer separately.
4.2. OPENING THE DOOR
Turn the handle down.
Machine with tilting
WARNING!
WHEN HANDLING THE MACHINE TILTING BY THE TILTING CONTROL, ALWAYS STAND ON THE SIDE
OF THE MACHINE. DO NOT STAND IN FRONT OR BEHIND THE MOVING MACHINE!
AVOID ACCESS OF ANY PERSON IN THE FRONT OR BEHIND THE MACHINE DURING ITS TILTING!
Open and secure the door in open position (see the Installation and maintenance manual, figures 3.4., 3.6.,
and 3.7. – “DOOR SECURING”. Upon opening the door, the tilting system gets automatically activated; now
the”up” and “down” buttons or the controller may be operated and the machine tilted as desired. The tilting
system is disabled when the door is closed.
4.3. LOADING THE MACHINE WITH LINEN
Machine with weighing system
Tare (set zero weight) every time before loading by pressing the 0-button.
Machine with forward and backward tilting – tilting the machine backward to a position suitable for
loading the linen
The machine may be tilted back as desired – up to the extreme backmost position. However, you do not
have to reach the extreme position. Just use the position which suits your needs. In order to tilt the machine
backwards, press and hold two buttons at the same time; the button for tilting (see figure 3.B., pos. 4) and
the button 5. After a certain time delay of up to approx. 10 seconds, the machine starts tilting. Tilting can be
interrupted if you release the pressed buttons. When the extreme position is reached, tilting is stopped. Tilting
is possible only with open drum door.
Machine with forward and backward tilting – loading the linen
WARNING!
DURING LOADING WHILE THE DRUM IS ROTATING, NOBODY IS ALLOWED TO STAND BEHIND / AT
THE BACK OF THE MACHINE. DO NOT PULL THE LINEN OUT WHILE THE DRUM IS ROTATING.
To make the linen loading easier use drum rotation function. To rotate the drum in tilted position press
and hold the button of drum rotating in required direction, figure 3.B., pos.1, or 2 and the button 6 on the
controller at the same time. It will make distribution of the linen easier. The linen can be loaded in several
steps - tilt the machine to a certain position and load some linen using the function of the drum rotating.
Then tilt the machine more and repeat the process again.
Machine with forward and backward tilting – tilting the machine to the basic position
After loading the linen, tilt the machine back to basic position. Press and hold two buttons at the same
time; the button for tilting (see figure 3.B., pos. 3) and the button 5. Tilting can be interrupted if you release
the pressed buttons. When the basic position is reached, tilting is stopped.
When the power supply is interrupted during tilting, the machine remains secured in its actual position
as well as after the power supply restart.
Do not overload the washer extractor. Overloading the machine can lead to a bad wash result. Half washing
loads can obstruct a proper function.
!
!
Summary of Contents for LH-550
Page 2: ......
