46
47
lid is rectangular and not square, and insert it accordingly.
4. Remove the particle filter (only applicable to V.300 White and Black devices)
by squeezing it out of the holder.
5. Loosen the surrounding rubber seal on the edge of the lid/container.
10.6 Pressure test for Lava
If the vacuum sealer fails to build enough pressure during the vacuuming pro-
cess, a pressure test can help determine which replacement part is needed. The
test can be conducted as follows:
1. Open the device’s lid.
2. Set the selector switch for bags/containers (Fig. 2, No. 2) to
.
• Does the vacuum pump start? If not, please contact customer service.
3. If yes, hold the right suction tube within the foam rubber seal with your finger.
• What vacuum pressure is now displayed on the manometer?
• Is an increase in pressure detected at the finger?
If the vacuum pressure does not go below -0.8 bar, please remove the lid of
the liquid separator and repeat the pressure test using the rear of the two
exposed tubes.
If insufficient vacuum pressure is also detected here, the vacuum sealer should
be sent in for repair.
Scan the QR code and watch the video tutorial on performing the Lava
pressure test.
Lava pressure test: la-va.com/pressure-test-v.300-series
Required spare parts can be obtained through the Lava online shop at www.
la-va.com, through the Lava service team, or from authorized dealers. Please
have the device type and purchase date ready (see label on the bottom of the
device). Opening the device without authorization will void the warranty.
11. Disposal of the old device
Do not dispose of the old device in regular waste and instead, take it to a col-
lection point for the return and recycling of electrical and electronic waste.
Lava GmbH & Co. KG is registered as a manufacturer of electrical and/
or electronic devices with the Stiftung Elektro-Altgeräte Register, Benno-Strauß-
Str. 1, 90763 Fürth, under the following registration number (WEEE-Reg.-Nr. DE):
DE 86929896.
Further information on disposal can be found at:
www.la-va.com/en/legal/electronic-device/
12. Technical specifications
Type
V.300 Premium X V.300 White
V.300 Black
Article No.
VL0300XP
VL0300W
VL0300B
Connection data
220 V – 240 V,
50 Hz
220 V – 240 V,
50 Hz
220 V – 240 V,
50 Hz
Power consumption
Pmax
500 Watt
600 Watt
600 Watt
Dimensions
(W/D/H)
410 x 230 x 98 mm 410 x 230 x 98 mm 410 x 230 x 98 mm
Weight
4,40 Kg
4,90 Kg
4,90 Kg
For further information and useful tips, visit www.la-va.com
Scan the QR code to directly access the practical shelf life table.
EN
