background image

LAUNCH 

                                                                              X-431  Throttle  III  User  Manual

 

Copyright Information 

Copyright  ©  2021  by  LAUNCH  TECH  CO.,  LTD.  All  rights  reserved.  No  part  of  this 
publication may be reproduced, stored in a retrieval system, or transmitted in any form or 
by any means, electronic, mechanical, photocopying, recording or otherwise, without the 
prior written permission  of  LAUNCH.  The  information contained  herein  is designed  only 
for  the  use  of  this  unit.  LAUNCH  is  not  responsible  for  any  use  of  this  information  as 
applied to other units. 

Neither  LAUNCH  nor  its  affiliates  shall  be  liable  to  the  purchaser  of  this  unit  or  third 
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as 
a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, 
or  alterations  to  this  unit,  or  failure  to  strictly  comply  with  LAUNCH  operating  and 
maintenance  instructions.  LAUNCH  shall  not  be  liable  for  any  damages  or  problems 
arising  from  the  use  of  any  options  or  any  consumable  products  other  than  those 
designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. 

All  information,  specifications  and  illustrations  in  this  manual  are  based  on  the  latest 
information  available  at  the  time  of  release.  LAUNCH  reserves  the  rights  to  make 
changes at any time without notice.   

Statement: LAUNCH owns the complete intellectual property rights for the software used by this 
product. For any reverse engineering or cracking actions against the software, LAUNCH will block 
the use of this product and reserve the right to pursue their legal liabilities. 

Trademark Information 

LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (LAUNCH) in China and 
other countries. All other LAUNCH trademarks, service marks, domain names, logos, and 
company names referred to in this manual are either trademarks, registered trademarks, 
service marks, domain names, logos, company names of or are otherwise the property of 
LAUNCH  or  its  affiliates.  In  countries  where  any  of  the  LAUNCH  trademarks,  service 
marks,  domain  names,  logos  and  company  names  are  not  registered,  LAUNCH  claims 
other  rights  associated  with  unregistered  trademarks,  service  marks,  domain  names, 
logos, and company names. Other products or company names referred to in this manual 
may be trademarks of their respective owners. You may not use any trademark, service 
mark,  domain  name,  logo,  or  company  name  of  LAUNCH  or  any  third  party  without 
permission from the owner of the applicable trademark, service mark, domain name, logo, 
or  company  name.  You  may  contact  LAUNCH  at  www.launchusa.com,  or  write  to 
LAUNCH Tech (USA), Inc.,

 

1820 S. Milliken Ave. Ontario, CA 91761, to request written 

permission to use Materials on this manual for purposes or for all other questions relating 
to this manual. 

Statement:  The  following  trademarks  mentioned  in  this  user’s  guide  are  only  for 
illustrative purpose, not for commercial use. 

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth 
SIG, Inc.. 

Summary of Contents for X-431 Throttle III


















































































Reviews: