LAUNCH
X-431 Throttle III User Manual
17
ADAS
This function enables users to perform ADAS (Advanced
Driver Assistance System) calibration operations. The
ADAS calibration software is disabled by default. Before
using this function, users must activate the ADAS function
using the ADAS Activation Card.
Videoscope
To check unseen or unreachable parts or components.
Oscilloscope / Ignition
Scope
To determine vehicle electrical equipment and circuit
trouble.
Sensor Simulator
To diagnose/simulate vehicle ECU sensor trouble.
Multimeter
To measure physical parameters such as voltage,
resistance, frequency etc.
*Note: The function utilizes the same hardware device as the
sensor module.
Battery Tester
To test whether vehicle's battery is good or not.
Other
mainly provides quick access to some system apps, such as camera, gallery, file
manager, clock, calendar, wireless upgrade etc.
4.4 Vehicle Menu Layout
After downloading the diagnostic software, go to
Diagnose
to check if all software are
completely downloaded and installed.
Tap
Diagnose
, the following screen will appear: