LAUNCH
X-431 Throttle III User Manual
10
3 Preparations
3.1 Charging the Tablet
Connect one end of the power adaptor to DC-IN port of the tablet, and the other end to
the AC outlet. The charging LED illuminates solid red while charging. Once it illuminates
solid green, it indicates that the battery is fully charged. Disconnect the power adaptor
from the AC outlet.
*Note: If the battery remains unused for a long period of time or the battery is completely
discharged, it is normal that the tool will not power on while being charged. Please charge it for
a period of 5 minutes and then turn it on.
*Warnings:
•
Only use the included power adapter to recharge the tablet. Use of any other adaptor will
damage the tool. We assume no responsibility for damage or loss resulting from using other
similar adaptors other than the specified one.
•
Always charge on a non-flammable surface in a well-ventilated area.
3.3 Power on/off
3.3.1 Power on
Press and hold the POWER button for about 3 seconds to turn on the tablet. The system
starts initializing and then enters the Home screen.
*Note: If it is the first time you have used this tool or the tool remains idle for a long period of
time, the tool could fail to turn on. Please charge the tool for a minimum of 5 minutes and
attempt to turn on again.
3.3.2 Power off
To turn the tablet off, press and hold the POWER button until an option menu appears.
Tap
Power Off
.
3.4 Screen Layout
There are 6 on-screen buttons available on the bottom of the screen.
Back:
Tap it to return to the previous screen.
Home:
Tap it to navigate to the Android’s home screen.
Recent App:
Tap it to view the recently launched applications and running
applications.