LAUNCH
X-431 Throttle III User Manual
28
Choose the report type and input the required information, and then tap
OK
.
*Note: Diagnostic report is classified into two categories: Pre-Repair report and Post-Repair
report. To facilitate the comparison of the pre-repair and post-repair reports and get
accurate test result, please make sure you saved the right type of the diagnostic report.
Enter the tester and customer name and then tap
OK
to save it. All reports are
saved in
Reports -> Health Reports
.
*Note: By default, the workshop information is blank. You can configure and revise it from
Settings -> Shop Information. After you configured the information, it will be automatically
generated every time the diagnostic report is saved. All vehicle and workshop information
will be appended as a tag on the diagnostic report, which allows you to easily retrieve the
desired report while performing the Filter function of Diagnostic Report.
•
Compare Results
: Tap to select the pre-repair report to compare. By comparison of
the pre- and post- repair reports, you can easily identify which DTCs are cleared
and which remain unfixed.