background image

 

 

 

Warranty 

This  warranty  applies  only  to  users  and  distributors  who  have  purchased  Launch’s  products  through  regular 
procedures. 
 
Launch shall provide a warranty against material or craftsmanship defects for 15 months from the date of delivery 
on its electronic products. Damages to the device or its components caused by abuses, unauthorized modifications, 
uses  for  a  purpose  other  than  for  which  it  is  intended,  or  operations  not  following  the  manner  specified  in  the 
manual, etc. are not covered by this warranty. Compensation for the damage to instrument of the automobile due 
to  the  defect  of  the  device  is  limited  to  repair  or  replacement,  Launch  is  not  responsible  for  any  indirect  or 
accidental loss. Launch will judge the attributes of the equipment damage according to its specified test method. 
None of Launch’s dealers, employees and business representatives has the authority to make any confirmations, 
reminders or promises related to the company’s products.   
 

Disclaimer Statement 

The above warranty can substitute warranties in any other forms. 
 

Order Notice 

Replaceable and optional parts can be ordered directly from LAUNCH authorized distributors. Your order should 
include the following information: 
Order quantity 
Part number 
Part name 
 

Customer Service Center 

Customer Service Center 
For any problem met during the operation, please call +86-0755-84528767, or send email to 
[email protected].     
If  the  device  needs  to  be  repaired,  please  send  it  back  to  Launch,  and  attach  the  Warranty  Card,  Product 
Qualification Certificate, Purchase Invoice and problem description. Launch will maintain and repair the device 
for free when it is within warranty period. If it is out of warranty, Launch will charge the repair cost and return 
freight. 
 
Launch address: 
Launch Tech Co., Ltd, Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Longgang District, Shenzhen, 
P. R. China,   
Zip code: 518129 
Launch Website: http://www. cnlaunch.com 
 

 

Summary of Contents for CNC-603A






























Reviews: