background image

LAUNCH

 

                   

BST-460 Battery System Tester User Manual 

ii 

Copyright Information 

Copyright © 2013 by LAUNCH TECH. CO., LTD. All rights reserved. No part of 
this publication may be reproduced, stored in a retrieval system, or transmitted 
in any form or by any means, electronic, mechanical, photocopying, recording 
or otherwise, without the prior written permission of LAUNCH. The information 
contained  herein  is  designed  only  for  the  use  of  this  unit.  LAUNCH  is  not 
responsible for any use of this information as applied to other units. 
 
Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or 
third parties for damages, losses, costs, or expenses incurred by purchaser or 
third  parties  as  a  result  of:  accident,  misuse,  or  abuse  of  this  unit,  or 
unauthorized  modifications,  repairs,  or  alterations  to  this  unit,  or  failure  to 
strictly  comply  with  LAUNCH  operating  and  maintenance  instructions. 
LAUNCH shall not be liable for any damages or problems arising from the use 
of  any  options  or  any  consumable  products  other  than  those  designated  as 
Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. 
 

Trademark Information 

LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called 
LAUNCH  for  short)  in  China  and  other  countries.  All  other  LAUNCH 
trademarks,  service  marks,  domain  names,  logos,  and  company  names 
referred to in this manual are either trademarks, registered trademarks, service 
marks, domain names, logos, company names of or are otherwise the property 
of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, 
service marks, domain names, logos and company names are not registered, 
LAUNCH claims other rights associated with unregistered trademarks, service 
marks,  domain  names,  logos,  and  company  names.  Other  products  or 
company  names  referred  to  in  this  manual  may  be  trademarks  of  their 
respective  owners.  You  may  not  use  any  trademark,  service  mark,  domain 
name,  logo,  or  company  name  of  LAUNCH  or  any  third  party  without 
permission from the owner of the applicable trademark, service mark, domain 
name,  logo,  or  company  name.  You  may  contact  LAUNCH  by  visiting  the 
website  at  www.cnlaunch.com,  or  writing  to  LAUNCH  TECH.  CO.,  LTD.

Launch  Industrial  Park,  North  of  Wuhe  Avenue,  Banxuegang,  Bantian, 
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to 
use Materials on this manual for purposes or for all other questions relating to 
this manual. 

 

 

Summary of Contents for BST-460




























Reviews: