LAUNCH
BST-460 Battery System Tester User Manual
10
W hen it's IN-VEHICLE test, battery installation type shall also be
selected, e.g. TOP POST, SIDE POST or REMOTE (This selection
does not apply to OUT-OF-VEHICLE), then press OK key to confirm.
REMOTE is applicable to some in-vehicle battery which is too tightly
installed to use the test clamps to connect the battery poles.
NOTE:
For REMOTE test, tolerance may exist. For any doubt, remove
the battery and select "OUT-OF-VEHICLE" to re-test.
3.3.4 Battery System Standard and Rating
BST-460 battery tester will test each battery according to the
selected system and rating.
Use UP/DOW N key to select according to the act ual system standard
and rating marked on the battery. See the arrow position as indicated