- 5 -
TECHNICAL SPECIFICATIONS
POWER SUPPLY and CONSUMPTION
(VDC)
12/24 VDC ±10%; 5 W
NO. OF LOAD CELLS IN PARALLEL and SUPPLY
max 16 (350 ohm); 5 VDC / 240 mA
LINEARITY
< 0.01% F.S.
ANALOG OUTPUT LINEARITY
< 0.01% F.S.
THERMAL DRIFT
< 0.0005% F.S./°C
ANALOG OUTPUT THERMAL DRIFT
< 0.003 % F.S./°C
A/D CONVERTER
8 channels, 24 bit (16000000 points), 4.8 kHz
DIVISIONS
(with measurement range ±10 mV = sens. 2 mV/V)
±999999
MEASUREMENT RANGE
±39 mV
MAX SENSITIVITY OF USABLE LOAD CELLS
±7 mV/V
MAX CONVERSIONS PER SECOND
600 conversions/second
DISPLAY RANGE
±999999
NO. OF DECIMALS / DISPLAY INCREMENTS
0÷4 / x 1 x 2 x 5 x 10 x 20 x 50 x 100
DIGITAL FILTER / READINGS PER SECOND
11 levels / 5÷600 Hz
RELAY OUTPUTS
N. 5 - max 115 VAC; 150 mA
DIGITAL INPUTS
N. 3 - optoisolated 5 - 24 VDC PNP
SERIAL PORTS
RS485
BAUD RATE
2400, 4800, 9600, 19200, 38400, 115200
HUMIDITY (non condensing)
85%
STORAGE TEMPERATURE
-30°C +80°C
WORKING TEMPERATURE
-20°C +60°C
ANALOG OUTPUT
16 bit - 65535 divisions
0÷20 mA; 4÷20 mA (max 400 ohm);
0÷10 V; 0÷5 V (min 2 kohm)
METROLOGICAL SPECIFICATIONS OF TYPE-APPROVED INSTRUMENTS
APPLIED STANDARDS
2014/31/EU; OIML R76:2006;
EN45501:2015
OPERATION MODE
single interval, multi-interval, multiple range
ACCURACY CLASS
III or IIII
MAX NUMBER OF SCALE VERIFICATION DIVISIONS 10000 (class III); 1000 (class IIII)
MINIMUM INPUT SIGNAL FOR SCALE VERIFICATION
DIVISION
0.2 μV
WORKING TEMPERATURE
-10°C +40°C
