Lauda MC 250, Operating Instructions Manual, Page: 43 / 72

1. Select the menu item for specifying the Auto-Shut-Down.
2. Confirm with the ENTER button.
3. Specify the time until the device should be switched to
standby.
Wait for approx. 4 seconds if you would not like to
apply the specified value. The screen automati-
cally returns to the default display.
4. Confirm with the ENTER button.
The value must be confirmed within 4 seconds
after the last input. Otherwise the screen returns
to the default display.

The device will be switched to standby after the time
entered. This is shown on the display as follows.
5. Auto-Start can now be configured before the expiry of Auto-
Shut-Down to switch the device on again afterwards after a
specified time. Otherwise you can start the device manually
by pressing the ENTER button.
CAUTION!
Automatic device start using the auto-start timer
Frostbite, risk of injury, device damage
 Before using the auto-start timer, ensure that all
preparations for the intended use have been made.
1. Select the menu item for specifying the Auto-Start.
2. Confirm with the ENTER button.
3. Specify the time until the device should be switched on
again.
If no Auto-Shut-Down is configured for the device,
the device is switched directly into standby with
the confirmation.
Wait for approx. 4 seconds if you would not like to
apply the specified value. The screen automati-
cally returns to the default display.
Configuring Auto-Shut-Down
Fig. 17: Auto-Shut-Down
Fig. 18: Standby
Configuring Auto-Start
Fig. 19: Auto-Start
Operation
Microcool 43