4 Device description
4.1
Purpose
The Ethernet module was developed for the following purposes:
Integrating constant temperature equipment in an Ethernet network.
Controlling constant temperature equipment via the LAUDA command
set.
Integrating constant temperature equipment in the LAUDA.LIVE cloud.
The USB interface of the Ethernet module has no function. It is
therefore no longer mentioned in this operating manual.
4.2 Structure
1 Panel with holes for fixing screws M3 x 10
2 Ethernet interface (10/100 Mbit/s, RJ 45 with 2 LEDs *)
3 Host USB port, USB 2.0 type A (intended for future expansion)
* The two LEDs indicate whether the interface is connected and whether
data is being transmitted (link/activity).
Fig. 1: Ethernet module
V1
Interface module LRZ 930
10 / 38