6 Commissioning
6.1
Switching the constant temperature equipment on
WARNING!
Risk of contact with cold/warm parts if the operator does not
realize that the device is switched on.
Scalding, cold burns
The remote control unit must be kept within visual range of
the device.
1.
Switch the constant temperature equipment on at the mains switch.
2.
After approx. 30 seconds, the Command Touch operating unit’s dis-
play shows the Home window with the main menu of the constant
temperature equipment.
The constant temperature equipment is ready for use and can be
operated by tapping the elements on the Touch Display.
6.2 Operating the device using the Command Touch unit
6.2.1 Home window
The Home window displays the current process temperatures and tem-
perature profile, as well as tile buttons representing the constant tem-
perature equipment’s main menu. The type and amount of tile buttons
available depend on the range of functions of the constant temperature
equipment and the accessory connected to it.
The current process temperatures are displayed on the left of the Home
window.
The temperature display can be enlarged by swiping from left to right.
Three displays steps are available; the number of columns displaying
three tiles each is reduced accordingly.
The temperature display can be reduced by swiping from right to left.
Fig. 2: Home window 2
Enlarging/reducing the size of the tem-
perature display
Fig. 3: Home window 3
V1
Command Touch operating unit
13 / 51