Lathem PC700 User Manual Download

Page: 2 / 52

THIS EQUIPMENT COMPLIES WITH FCC REQUIREMENTS

PURSUANT OF PART-15

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by

the party responsible for compliance could void the user’s authority to operate this

equipment.

NOTE: This equipment has been tested and found to comply with the limits,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a business installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appariel numerique de la classe A est conforme a la norme NMB-003 du

Canada.

Lathem Time Corporation

200 Selig Drive, SW,

Atlanta, GA 30336

www.lathem.com

Revised 04-26-2018

Document number: USG0114A

Summary of Contents for PC700





















































Search results

Summary of Contents for PC700

Reviews:

Related manuals for PC700

Brands by name

Popular brands

Lathem PC700, User Manual

Search results

Summary of Contents for PC700

Reviews:

Related manuals for PC700

Brands by name

Popular brands