Lathem PC700 Page 6 User Manual Download

Page: 6 / 52

•

Welcome

Clock Features and Specifications

•

Windows CE 6.0 - The power of embedded Windows CE to
provide fast and dependable operation.

•

LCD Color Touch-Panel - Use the large easy to read touch-
panel for set up and data entry.

•

On-Board Relay - The on-board relay can be used to control
bells/signal devices, or security access.

•

The PC700 clock has an integrated antenna and is
compliant with the IEEE 802.11a/b/g standard. It supports
WEP, WPA and Open authentication.

•

PC700 series Idle Screen - Easy to read time/date screen
will display after 2 minutes of inactivity on the clock.

•

User friendly design - Large easy to read touch-panel.

•

Comprehensive support agreements minimize technical
difficulties.

•

Numerous Accessory options further enhance the
functionality of your PC700 series clock.

Accessories

Accessories are offered to further enhance your PayClock system.
Visit

http://shop.lathem.com

to purchase additional accessories like

the ones listed below.

•

Badges

•

Badge Racks

Getting Help

You can access the help desk and answers to your issues in several
different ways. In addition to resources within the PayClock
software, assistance may be accessed online, via email, via
telephone, or through your dealer.

PayClock Help

The Online Help allows you to search through an index of help topics
to locate the answer you need.

Summary of Contents for PC700





















































Search results

Summary of Contents for PC700

Reviews:

Related manuals for PC700

Brands by name

Popular brands

Lathem PC700, User Manual

Search results

Summary of Contents for PC700

Reviews:

Related manuals for PC700

Brands by name

Popular brands