
Initial Set-Up
Maintenance Checklists
3
3-26
Lastec//021819
Initial Set-Up
3.32 Maintenance Checklists
Complete the appropriate maintenance checklists in a timely manner. (
).
3.33 Pre-Operation Equipment Inspection Checklist
Perform the following equipment inspection prior to each operation of the Articulator:
Verify that the parking brake is set.
Check the fuel level.
Verify that the fuel shut-off valve (behind and left of the operator) is in the Left or Right position.
Check engine oil level and condition.
Check the air cleaner and filter elements for contamination or debris.
Brush out and clean the radiator and hood grills.
Check coolant level and condition in overflow tank.
Check hydraulic fluid level and condition. Add if low - do not overfill. Change oil and filter if neces-
sary.
Inspect the entire hydraulic system for leaks.
Adjust hydrostatic pumps if needed.
Check both hydrostatic pump belts and tension springs for proper installation, tension and condi-
tion.
Check the gearbox oil level and condition.
Check entire area around and under gearbox for oil leaks.
Check the gearbox belts for proper tension and condition. Gearbox drive belt tension is
PRESET
.
Increasing the spring tension could cause serious damage.
Use Lastec Part No. 056599
(spring) ONLY
.
Check the mower deck drive belt and idler tension spring for proper installation, tension and con-
dition.
Clean entire mower deck area under operator seat pan of any grease, oil, fuel, grass, or debris.
Check all mower deck belts and idler tension springs for proper installation, tension, and condi-
tion.
Clean each deck under the belt covers of any grease, oil, fuel, grass, or debris.
Inspect all blades for proper installation, orientation, tightness, sharpness, and overall condition.
Be sure the seatbelt is secure and operable.
Adjust the operator seat for proper operator position.
Check that both steering controls arms are properly linked, free of debris, and operating freely.
Set the mower deck height to the desired level.
Calibrate the mower deck height adjustment rods if needed.
Check the air pressure in the rear drive tires. (18 PSI.)
Verify proper function of all gauge wheels.
Verify that all warning decals are in place, visible and legible.
Verify that all covers and safety devices are properly installed and secure.
Check that the discharge chute is clear of debris, properly mounted, and in good condition.
Inspect entire Articulator for loose or entangled parts, debris, obstructions, or neglected tools.
Verify that the battery has sufficient charge to start the engine.
Check engine for abnormal exhaust or sounds.
Check oil pressure and coolant temperature lights.
Check the mower deck lift arms for proper lifting and locking operation.
Be sure the operator seat pan and engine cover are properly closed, latched, and secure.
Record the hour meter setting if desired.
Complete the appropriate maintenance checklist (
).
Summary of Contents for The Articulator 3696H
