Lastec The Articulator 3696H, Owner'S Manual, Page: 52 / 86

Initial Set-Up
Tires and Wheels
3
3-22 Lastec//021819 Initial Set-Up
3.26 Tires and Wheels
All tires are foam filled with the exception of the rear drive tires.
Check the air pressure in the rear drive tires. Maintain air pressure at 18 psi.
Verify proper function of all mower deck wheels. The wheels should turn freely without
excessive side-to-side motion, and be free of debris. Clean, adjust, replace, and grease
as necessary.
Check that each wheel swivels freely in the shaft pivot collar, and the bushings are in
good condition. If any wheel does not swivel freely, clean and grease the shaft collar
assembly. Replace the bushings if necessary.
3.27 General Inspection
Verify that all warning decals are in place, visible, and legible.
Verify that all covers and safety devices are properly installed and secure.
Check that the discharge chute is clear of debris, properly mounted, and in good condi-
tion.
Inspect entire Articulator for loose or entangled parts, debris, obstructions, misplaced
tools, or any other possible safety hazards, equipment hazards, or projectile hazards.