Lastec The Articulator 3696H, Owner'S Manual, Page: 54 / 86

Initial Set-Up
Engine
3
3-24 Lastec//021819 Initial Set-Up
To change the battery, insure all control switches are in the OFF position before discon-
necting the negative (-) ground cable. If control switches are active, sparking and explo-
sion are possible.
See Section 2.9 Use Caution When Working With Batteries.
Batteries produce explosive hydrogen gas while being charged. To prevent fire or explo-
sion, only charge batteries in well-ventilated areas, away from any spark, open flame, or
other sources of ignition. Always remove jewelry before handling batteries.
Keep all bat-
teries out of the reach of children!
3.29 Engine
While the engine is running, check the exhaust. During proper operation, the exhaust
should be colorless. If the engine runs continuously with dark exhaust, stop the engine
and correct the problem before operating the Articulator. Refer to the
Kubota Diesel
Engine Operator’s Manual for proper instructions.
Listen for any unusual engine noises. If the engine suddenly slows down or accelerates,
makes abnormal noises, runs roughly, or displays any other usual characteristics, stop
the engine and correct the problem. Refer to the
Kubota Diesel Engine Operator’s Man-
ual for proper instructions.
Check the oil pressure and water temperature indicator lights (the center and left red
lights located at the top of the control panel). These lights will indicate an inadequate
engine oil pressure, or an excessive engine coolant temperature. If either light is acti-
vated while the engine is running, stop the engine and correct the problem before operat-
ing the Articulator. Refer to the
Kubota Diesel Engine Operator’s Manual for proper
instructions.
NOTE: Blades will shut off automatically if overheating occurs.