manualshive.com logo in svg

Laspaziale S1 Dream, Instruction Manual

Share
Download
Laspaziale S1 Dream Instruction Manual Download Page 16

espresso coffee machines

14 

LSC 024 - Rev. 00 - Ed. 11/2014

Dream - Dream T

5.  REMOVING THE PACKAGING

after unpacking the machine, please check its integrity; in case of doubt, do not use it and consult the manufacturer.
Packaging materials must not be left within children’s reach since they are potentially dangerous.

Attention!

The appliance weight is more than 30 kg and therefore, it cannot be moved by a single person alone.

Take note!

Dispose of the packaging as per the norms in force of the country in which the machine is utilised.

5.1  STANDARD EQUIPMENT OF THE MACHINE IN COFFEE POWDER CONFIGURATION

KEY

A.

  Two filter holders

B.

  one spout for one coffee 

C.

  one spout for two coffees 

D.

  2 sets of filters

E.

  1 set of shower heads

F.

  1 wrench for shower head removal

G.

  1 brush

H.

  1 manual coffee tamper

I.

  one coffee dose

L.

  sd card reader

M.

 group Head gasket

Summary of Contents for S1 Dream

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands