Laski VD 500, Operating Instructions Manual

Page: 22 / 39

22
Is strictly off limits test run of the exhauster puting near the suction hole to parts
of the human bodies , stoking limbs to the suction-fan ,
also to the flow of air.
-
Set the exhauster so that the suction hose has optimal access to the leaves to be
sucked.
Minimal longht suction hose that can be machine use is 3m!
-
If any displacement of the exhauster is required then first put the suction hose
in the holder and fix it by means of its binding band.
- In case of two attendants (driver and operator) it is necessary to make simple
signals clear before working. During operation it is not easy to make any
agreements because of operating noise. The driver must always have overview
over the site.
-
Catch the grip of the suction hose and apply the hose slowly to leaves to be
sucked. Proper sucking action requires keeping the continuous air flow taken
in the hose together with leaves. Do not make fast and abrupt changes while
sucking what is important especially when cleaning wet and heavy leaves,
grasses etc.
- While filling the loading space of a towing vehicle let the air escape from the
space, i.e. let about 15% of this space free.
- Do not use the choke while working.
- Avoid clogging the suction hose.
- If you heard any strange noise or vibrations then turn off the machine
immediately and contact your dealer or directly the manufacturer.
- Should you fill up the fuel tank then use always a proper filling funnel. Do not
fill the fuel tank while the engine is hot or still running.