Laski VD 500, Operating Instructions Manual

Page: 19 / 39

19
Check the engine oil level with a dipstick and refill if necessary. The oil level
should be between both marks (MIN and MAX).
-
Check the suction hose for tightness – any untightness reduces suction
performance essentially (wear, damage).
- For putting the suction hose on its adapters use always binding bands.
- In case of any damage on the exhauster contact your dealer or authorised
service.
- For replacement use always original spare parts. Parts, such as rotors, should
be balanced properly.
- Avoid spillage at filling oil or fuel. Use always a proper filling funnel. If any
fuel or oil is spilled or overflowed then wipe off the spots immediately. In case
of petrol let it evaporate.
- Check tightening of bolted joints, especially guards, grids and completeness of
other parts.
- Check movability of rotary parts.
- Max. capacity of the fuel tank is 16 l. Minimal fuel charge is 5 l.
- The fuel to be used is unleaded petrol NATURAL 95.
- After storage check the battery. Recharge it if necessary.
- Plus and minus poles should be connected just before starting.
- It is strictly forbidden to do any unauthorised technical changes on the
machine.
Before Putting into Operation
- Before putting into operation, check up the machine for contingent damages
and completeness.
- Check up tightening of bolted joints.
- Check up permissible slack of V-belts.
- It is strictly forbidden to start the machine with its hoods and guards removed.
- Do not start the machine with oily spots.
- Any servicing or adjustment is allowed to be done only if the engine was put
out of operation.
- Check up the air filter element regularly, especially while working with dusty
leaves. If fouled, change it.
- Before working, check up on-site conditions: leaves to be sucked must be free
of any unwished objects, such as stones, metal pieces etc.
- Check up tightening of fixing bolts on the fan spiral casing.
- Direct the hose into the loading area of a transport vehicle and fix it properly.
- Connect the battery (plus pole).