Manual: PL-3000RGB
NL
/ PL-6000RGB
NL
/ PL-12.000RGB
NL
page 12 / 34
Select „Internet Protocol(TCP/IP)“ and click on „Properties“
Select: „Use following IP address“, not „Obtain an IP address automatically“.
It is not appropriate for initial configuration to use AutoIP / DHCP-Mode of the network card.
Enter a IP address e.g. 192.168.0. and a
value less than 100 or above than 115
, e.g.
192.168.0.116
The first two network addresses 192.168. are predefined by network card.
