SmartCross-Laser
09
3
LASER
LASER
LASER
LASER
GB
Slope mode
Do not release the transport restraint, set the ON/OFF switch
to „OFF“. Select and switch on the laser with the selection
button. Sloping planes can now be measured. This mode
cannot be used to perform horizontal or vertical levelling
as the laser lines are no longer aligned automatically. The
LED lights constantly red.
Technical data
Self-levelling range
± 5°
Accuracy
± 0.5 mm / m
Operating range (depending
on room illumination)
10 m
Laser wavelength
650 nm
Laser class / line laser output
power
2 / < 1 mW
Power supply
2 x 1.5V alkaline batteries
(type AA, LR6)
Operating time
15 hours (alkaline batteries)
Operating temperature
0 °C ... +40 °C
Storage temperature
-10 °C ... +70 °C
Dimensions (W x H x D)
55 x 85 x 75 mm
Weight (incl. batteries)
260 g
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
Subject to technical alterations. 07.15
Summary of Contents for SmartCross-Laser
Page 67: ...SmartCross Laser 67 ...
