LaserLiner BeamControl-Master, Operating Instructions Manual

Page: 12 / 76

12 EN
Manual rotary lasers
– Exact horizontal alignment
– Additional vertical levelling
– Easy alignment of slopes
– Laser modes: spot, scan, rotary and hand receiver mode
– Plumb function for synchronous working on floor and ceiling
– Special die-cast zinc platform guarantees long-term stability
– SpotLite marking: Effective prevention of parallax errors and easy marking
of reference heights
Completely read through the operating instructions, the „Warranty and
Additional Information“ booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
!
General safety instructions
– The device must only be used in accordance with its intendedpurpose and within the
scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate
the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or
significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery
charge is weak.
Safety instructions
Using class 2 lasers
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes
and immediately move away from the beam.