LaserLine Flatwork Ironer Series, Instruction Manual

Page: 211 / 238

GL-16-110-F TECHNICAL SPECIFICATIONS 11/21/08
GL-16-110-R
6500-212B App:GW
*
Based on operation with natural gas at less than 1,500ft.(450m)altitude. BTU input will vary slightly on other types of
gas and will be reduced at higher altitudes.
** Depends on speed, temperature, moisture retention, demand, production, and other local factors.
Specifications subject to change without notice.
Production
Variable Speed Drive Output
Feet per Minute (m/min)
Minimum 8 (2.5)
Maximum 45 (14.0)
Heating
Gas
Maximum Gas Input per Hour , BTU* 238,000
Average Gas Input per Hour , BTU** 55-65% of max.
Operating Temperature Range , F ( C ) 200-400 (95-200)
Gas Supply Connection , inch (DN) 1 (DN 25)
Motors
Total 2 1/6 (1.62)
Drive , HP (kW) 1/2 (0.37)
Exhaust Blower 1 , HP (kW) 1 (0.75)
Combustion Blower 1/3 (0.25)
Delivery Drive 1/3 (0.25)
Electrical
Frequency : All Models 50 / 60 Hz
Total Amps Type R 9.25 8.4 5.1 4.2 3.4
Total Amps Type F 7.7 6.9 4.0 3.5 2.8
Three Phase Voltage 208 230 380 460 575
Total Amps Type R 29.0 15.0
Total Amps Type F 23.0 12.0
Single Phase Voltage 115/1 230/1
Exhaust
Air Discharge
Main
CFM , (m
3
/min) max. at 1” S.P. 1450 (41)
Vent Diameter , inches (mm) 10 (255)
Rolls
Number of Rolls 1
Roll Diameter , inch (mm) 16 (406)
Usable Length , inch (mm) 110 (2794)
Approximate Shipping Weight Ironer
Domestic , Type R lb (kg) 2850 (1300)
Export , Type R lb (kg) 3250 (1480)
Domestic , Type F lb (kg)
2700 (1225)
Export , Type F lb (kg) 3100 (1406)