LaserLine Flatwork Ironer Series, Instruction Manual

Page: 17 / 238

GL16 Introduction
1-5
Safety Labels
WARNING (orange) and CAUTION (yellow)
labels are placed at locations around the unit to
keep operators and maintenance personnel alert
in particular areas (Figure 1-2).
WARNING labels alert personnel that personal
injury may result from not following
recommended procedures. CAUTION labels alert
personnel the unit may be damaged if conditions,
practices, or procedures are not observed.
When training operators, take the time to locate,
review, and understand all areas where labels are
posted.
NOTE: Do not remove safety
labels at any time. If a label needs
to be replaced, contact Chicago
Dryer Company for free
replacements.
Perform only when the unit is OFF
(with power disconnected) and COOL.
Safety Messages in this Manual
WARNING and CAUTION messages appear
in this manual to highlight essential safety
information.
WARNING messages alert personnel that
personal injury may result from not following
recommended procedures.
WARNING
Never operate the unit unless
all safety systems are
working correctly and all
access panels are in place.
BLACK BOX WARNING messages alert
personnel of the operating condition a unit must
be in before performing any procedure.
Personal
injury may result from not following
recommended procedures.
CAUTION messages alert personnel that the
unit may be damaged if conditions, practices,
or procedures are not observed.
CAUTION
Never use compressed
air on or around
electronic components.
Figure 1-2: Safety labels remind operators and
maintenance personnel that care must
be taken when working near these
areas.