pag. 6
ENGLISH
It is possible to know the last alarm trigger that has occurred by turning on the ignition after dis-
arming the alarm system.
Each alarm cause is associated to an identification flash code:
The alarm cause is displayed by the LED flashing 5 times the alarm identification flash code, e.g.:
4.4 - ALARM TRIGGER HISTORY
Bonnet/
Boot
opening
alarm
=
X 5
The system will automatically exclude the sensor, which has generated 8 alarm cycles in one
armed period. All the other sensors will continue to protect the vehicle. The maximum
number of alarm cycles for every sensor is 8, except for power supply interruption to siren
(10 alarm cycles).
Note:
If a sensor continues to remain activated whilst in the pre-alarm time, the system will
generate an alarm condition. When the alarm system is next disarmed a shorter than normal
flash** of the direction indicator lights and an accoustic tone will be produced to indicate that
a sensor was activated whilst arming. To identify the sensor that was activated, consult the
“
ALARM TRIGGER HISTORY
”
4.3 - ALARM CYCLE LIMITATION
2 FLASHES/PAUSE:
the IGNITION KEY sensor generated an alarm condition
3 FLASHES/PAUSE:
the DOOR/HATCH sensor generated an alarm condition
4 FLASHES/PAUSE:
the BONNET/BOOT sensor generated an alarm condition
6 FLASHES/PAUSE:
the ULTRASONIC sensor generated an alarm condition
FLASH CODES
ALARM CAUSE
ISUT670T NEW.p65
19/12/2011, 16.06
6
