pag. 7
ENGLISH
5 - PROBLEM SOLVING
If you find you have to get closer to the vehicle to unlock/disarm the alarm, this is normally
a indication that the original remote control batteries may need replacing. Refer to vehicle’s
user guide for replacing the remote batteries.
If your alarm sounds for no apparent reason, please refer to the
“ALARM TRIGGER HISTORY”
for possible condition. Possible causes of the alarm condition could be:
-
Vehicle has been tampered with.
-
Windows/sunroof are not fully closed.
-
Doors/boot/bonnet are not fully closed.
-
Check that the air vents have not been left open. Air movement within the vehicle may trigger
your alarm.
-
Check the doors/boot/bonnet contact switches operate correctly.
-
Articles inside the vehicle are moving e.g. jacket, hanging toys or accessories.
6 - PASSIVE ARMING*
This function, if enabled, allows the alarm to automatically arm after 60 seconds after
switching the ignition OFF. However, when armed through this function it will not activate
the comfort output/ultrasonic sensors. The next alarm disarming can be activated by the
EMERGENCY ELECTRONIC KEY or the ORIGINAL REMOTE - in this case you may need to prompt
the system for locking and then prompt it again for unlocking, in order for the alarm to be
synchronised again with the lock status.
ISUT670T NEW.p65
19/12/2011, 16.06
7
