TO
SEARCH FOR A PARTICULAR TIME/FRAME
-
Time Number Search/Track Time Search/ASS Time Search/Frame Number Search
1. Press CHP/TM during playback.
When the display shows chapter No., press this button.
CAUTION
If a disc does not contain information
on the digits of seconds,
specify the time number only as far as the minute digits.
2. Enter
I:Il
rn,
Wand
[I]
with the digit buttons.
If you make a mistake during entry:
Press CLEAR to reset the time number
to "0.00",
and then
press the correct digit buttons.
2. Press SKIP ~
or ~
so that
the desired
track
number
appears in the front panel display window.
3. Enter the track time (elapsed time from the beginning
of the
specified track) with the digit buttons
(0 - 9).
1. Press CHP/TM so that "Ab" appears in the front panel display
window.
(On the monitor
screen, "ASS"
appears.)
2. Enter the elapsed time from the beginning of the disc with the
digit buttons
(0 - 9).
3. Press PLAy ••...
Playback starts from the specified elapsed time.
Any desired frame can be searched for by specifying
its frame
number.
1. Press CHP/TM
during
playback.
When the display
shows
chapter No., press this button
again. "Frame 0" is displayed.
NOTES:
•• The
+
10 button does not function .
• If you make
a
mistake during entry, press CLEAR and press the correct
digit buttons.
To exit search mode:
Press CLEAR .
When PLAy ••..on the remote control
unit is pressed:
A still frame is displayed (LD or video part of CDV). To start normal
playback, press PLAy ••...
21
<VRB1139
>
En
