I
PICTURE QUALITY ADJUSTMENT
(V-DNR 3D)
When playing
some LDs, there may be noise or color distortion.
3D digital NR reduces this noise and color distortion.
You can independently
adjust luminance
(brightness)
and saturation
(color) as desired. This unit also features 3D
Y/C
separation
circuitry.
For minimal
cross color and
improved
SIN ratio with still images and images that move very little, turn the shuttle clockwise
for increased
3D
Y/C
separation.
For clearer
fast moving
images, turn the shuttle
counterclockwise
to move from 3D
Y/C
separation
to 2D
Y/C
separation.
Selecting picture quality
.Select
with the remote
control's
memory
button.
This unit has
three memories.
You can memorize
up to three picture
quality
settings.
• When you plug in the power cord and first switch power ON, the
setting
is STANDARD.
STANDARD:
This is the standard
(recommended)
setting.
Indication
is displayed
for two seconds.
NR OFF:
This is the NR OFF setting.
Other
settings
are the same
as
STANDARD.
L_OFF
_J
Indication
is displayed
for two seconds .
• When
picture
selection
is STANDARD
with
NR OFF, you can
confirm
settings
by pressing
the SELECT. (Adjustment
is not
possible.)
• Press MEMO once, and the current
mode
is displayed
for two
seconds. Press the button while the current mode is displayed
to
switch to the next mode .
MEMORY:
These are your settings. Confirm setting adjustments
by pressing
the SELECT. This puts you in the Picture
Quality
Adjustment
mode.
•
J
l,mmv
2
•
J
L·,'"
• When you plug in the power cord and first switch power ON, the
settings
in MEMO are STANDARD.
Select Y-NR with the SELECT, and adjust
with the SHUTILE
ring. You can vary noise reduction
for brightness
(in 10 steps).
At the maximum
setting,
noise reduction
is maximum.
Memory 1
"VNR
C NR
3D Vie
Sharp
Minllllll---
Max
Minlll-·
-- -- Max
Minlll-·
----
Max
Minll.l·
----
Max
Standard
settings
Settings
adjusted
with
the shuttle
ring
Select Sharp with the SELECT, and adjust with the SHUTTLE
ring. Atthe maximum
setting, vertical edges are attheir sharpest.
~
~~
~·O-·~·~
M
ye.m
N
o
R",,'
~
lbdJ
•
Minllll
•• ---Max
C-NR
Minill-'
----
Max
V-DNR 3D
3D.
Y/e
Minill-'
----
Max
~
sHGnLE';Og
~."
"" ••••. ----~
.With
video
output
jack
connection,
picture
quality
is
changed
by Y-NR and C-NR only.
• With S-Video
output
connection,
picture
quality
is changed
by Y-NR, C-NR, 3D
Y/C,
and Sharp
adjustments.
• If you do not operate
the memory
button
or shuttle
ring for 15
seconds,
setting
displays
go off, but setting
data is stored
in
memory.
18
<VRB1139>
En
Select C-NR with the SELECT, and adjust
with the SHUTILE
ring. You can vary noise reduction
for color (in 10 steps). Atthe
maximum
setting,
noise reduction
is maximum.
Memory-1
Y-NR
"'C-NR
3D.
vie
Sharp.
Min
111111--
-
Max
Minlll-·
----
Max
Minll.-·----Max
Minl.l.o----Max
Select 3D
Y/C
with the SELECT, and adjust with the SHUTILE
ring. The maximum
setting
is for maximum
3D
Y/C
separation.
Memory-1
Y-NR
C-NR
"'30.
vie
Sharp
Minl
•••••
---
Max
Minl
••
-·
----
Max
Minill-'
----
Max
Min •••••
----
Max
Reduces cross color with
images
that
move
very
little .
Increased
2D : Assures
a clear
picture
with fast moving
images .
