LaserBit LB Series 4.3 page
35
Meanings of the LEDs
Power:
The head is powered up.
RX OK:
There is enough light to start
communicate through the link.
Level LEDs:
The function of these10
green LEDs is to give visual
information about the incoming
light efficiency
Installation LED:
It signs you have the biggest
amount of incoming light
efficiency which is still not
overloads the receiver
Saturation:
Overload (Overloading can cause stop in the communication, and permanently it can
damage the receiver)
After 15mW (or higher) incoming light efficiency
•
Open up the heads
•
Power up the heads!
