LaserBit LB Series 4.3 page
24
o
2x4ps of M4,5x70 cross headed self-tapping-screws
•
a manual CD
•
2ps of Alignment Base Units /a heavy, podgy, hub cap form metal appliances/
•
2x2ps of spacers
•
ABU accessories /a plastic bag attached to t
o
2x4p
he ABU/:
s of M8 nuts
ng washers
•
accessories for the head fixing /on the legs
f M12 nuts
ng washers
here are four key issues that the site survey has to shed light on. Proper system
lear line of sight
- The entire optical path between the two ends must be free
olid mount surface
- is the key for long-term operation. Since the diameter of
ast-West orientation
- although the receiver optics are equipped with optical
order to comply with the requirements of the successful installation - including the
o
2x4ps of 8mm spri
o
2x4ps of 8mm washers
of the heads/
o
2x4ps o
o
2x4ps of 12mm spri
o
2x4ps of 12mm washers
7 Sites of installation
7.1 Key factors of operation
T
operation cannot be guaranteed without satisfying all of the four requirements.
C
of any obstacles. It not only means that one has to see the other side, but other
possible sources of disturbance should also be taken into consideration. For
example there might be turbulence above the roofs and other constructions, and this
can cause fraction or scattering of the beam or snow accumulation on roofs too
close to the beam can influence or even interrupt communication.
S
the beam is limited, it is extremely important to mount the unit on a stable structure
with the possible smallest movement. This way the receiver of the remote unit
cannot get out of the beam due to the movement of the opposite head.
E
filters to protect the receiver diode from the effect of undesired light sources, direct
sunshine can cause saturation of the diode. This prevents the system from working
properly for several minutes a day at certain times of the year. In most cases this
effect can be avoided by careful selection of the mounting spot.
In
discussed four key factors and other criteria - the following matters should be taken
into consideration.