SPK-IPT200
USER MANUAL
7
2.
Press the TUNE+/FORWARDER or TUNE-/BACK buttons to cycle through the preset locations
from 0 to 10
3.
When you have selected the required preset location, press the MEM/TIME/PLAY/PAUSE button
to store the station in that location
Note: Repeat steps 1-3 for all stations you wish to store
RECALLING RADIO STATION FAVOURITES / PRESETS
1.
To recall a station on a preset location, press the MEM/TIME/PLAY/PAUSE button. You will see
CH 1 on the display to indicate preset location 1
2.
Use the TUNE+/FORWARD or TUNE-/BACK buttons to cycle through 0-10. When the location is
selected pause for a second for the station to tune
CONNECTING AND USING YOUR IPOD /IPHONE
1.
Press the MODE/STANDBY button to switch the unit ON if in STANDBY mode
2.
Press the MODE/STANDBY button repeatedly until you reach the DOCK function icon, insert the
iPod into the dock, taking case when mounting on the 30 pin connector
3.
Pressing the MEM/TIME/PLAY/PAUSE button enters PAUSE mode, another press resumes
playback
Note: You can bypass the above steps and simply dock an iPod in ANY mode. The unit will wake and
begin to play the iPod. The iPod will begin to play automatically.
4.
Adjust the volume using VOL+/ALARM 2 & VOL-/ALARM 1 buttons on the unit
Note: the iPod’s volume controls will have no effect on the output level
5.
To skip to the next track press the TUNE+/FORWARD button (8). To skip to the beginning of the
current track press the TUNE-/BACK button (4).
6.
Two presses skips to the previous track. Every subsequent press of the TUNE-/BACK button skips
to previous track
7.
To fast forward or rewind the current track press and hold the TUNE+/FORWARD or TUNE-
/BACK. Release the button to resume playback
Note 1: This units does not control the iPod menu so all navigation and track selection must be
completed on the docked iPod
Note 2: When docked a compatible iPod will be charged during STANDBY and POWER ON modes
