SPK-IPT200
USER MANUAL
5
Note 2: You will not be able to detect that this feature is working if you are in AM time (not PM) as
11am is 11:00 hours in 24 hour time. If you are in PM time you will see the icon for PM disappear
as 24 hour time is engaged.
1.
Check you are in either the DOCK or AUX mode. If not press the MODE/STANDBY button until
you are.
2.
Then press and HOLD the SNOOZE/SLEEP button (6) until the change has taken effect.
3.
Press and hold the same button again to toggle between each mode.
4.
Then press and hold the STANDBY button to enter STANDBY mode and save the settings.
USING THE ALARM FUNCTION
Note 1: The SPK-IPT200 has a dual alarm function
Note 2: The alarm can only be set in STANDBY model
Note 3: The device will exit the alarm set function if not buttons are pressed within 5-10 seconds.
Setting alarm 1
1.
From the standby screen, press the MEM/TIME/PLAY/PAUSE button (3) twice. The ALARM 1
icon will appear and the clock display will start flashing
2.
Press the TUNE-/BACK button (4) repeatedly until the Hour digit is correct. Repeat for the
Minute digits but use the TUNE+/Forward button (8)
3.
Once the time has been set, press VOL-/ALARM1 button (5) repeatedly to cycle through the
alarm options BUZZER, iPOD or RADIO (indicated in the top left of the display)
4.
Once the time & wake up mode has been set you can either leave all buttons for a few seconds
to store the setting or press the MEM/TIME/PLAY/PAUSE button (3) to continue set Alarm 2
Setting alarm 2
The settings for alarm two is very similar to the settings for alarm 1
5.
Instead of pressing the MEM/TIME/PLAY/PAUSE button twice however, press it 3 times to enter
settings for alarm 2. This is indicated when the alarm clock 2 icon appears
6.
Change the time/s as normal but use the VOL+/ALARM2 button to select the wake up mode
Note 1: The alarm will increase in volume and activate for 1 hour or until the user cancels the alarm
Note 2: By selecting no wake up mode in one or both alarm settings (ie. iPod, Radio etc) no alarms will
sound.
Snooze or cancel an alarm
Note: The alarm will sound at the same time the next day unless the alarm setting is disabled
1.
To cancel the alarm (when sounding) press the MODE/STANDBY button (9). (The alarm will then
sound again 24 hours later)
2.
To activate the SNOOZE function press the SNOOZE/SLEEP button (6) when the alarm sounds.
The alarm will sound again 8 minutes later (or until it is cancelled)
