TIPS FOR SAFE
CHARGING
1. AVOID OVERCHARGING.
Disconnect power stations and devices after the battery
reaches a full charge. Leaving devices on a power station
too long may cause them to overheat and can reduce
battery life.
2. PICK THE RIGHT POWER OUTPUT.
Take special care to match the correct voltage and amp
values your device requires when using a power station.
Some power stations have multiple output ports so check
which one might be the most suitable for your device.
3. CHARGE ONLY ON NON-FLAMMABLE SURFACES.
Devices and power stations can get warm or sometimes
even hot during charging. Make sure to always place the
device and power station on a non-flammable surface when
charging. Do not place on beds, pillows, paper, or near any
fabric such as curtains or clothing under any circumstances.
4. AVOID EXTREME ENVIRONMENTS.
Do not recharge your devices or leave a power station in
environments where extreme temperatures can occur.
On particularly hot days do not charge or leave your power
station in places such as the inside of a car, or an
unairconditioned room. If it’s possible, try and wait till
the evening when temperatures are a bit cooler.
5. MONITOR CHARGING.
Recharge your devices while you are nearby, preferably in
the same room or another room close by. This way when
there is a defective battery or power station, you are able to
disconnect it immediately.
