4
Copyright 2005 Laser Arts
FUSELAGE ASSEMBLY:
1.
Remove the 3/32” fuselage sides, 1/16” front fuse doublers, and 1/8” F2 from the parts sheets.
2.
Glue the 1/16” fuselage doublers into place as shown in the image below, making sure they are lined up with the fuselage sides and
MAKE SURE you make a RIGHT and LEFT side. DOUBLE CHECK THIS before you glue the parts.
3.
Glue the 1/8” balsa formers F2, F3, F4 and F5 onto one fuselage side, making sure they are 90 degrees to the fuselage side. Make
sure that the notch in F2 is facing UP, the slots in F3 are towards the TOP, and that the boom holes in F4 and F5 are facing DOWN.
4.
Glue the other side to the assembly from the previous step. Make sure that the formers are sitting flat on the table and that the sides
are vertical.
5.
Remove the 1/8” balsa F1 from the parts sheet. Glue F1 into place, making sure that the fuselage assembly remains straight while
you glue it in place.
