18
Copyright 2005 Laser Arts
26.
Glue the short 1/8” brace to the back of the main brace as shown.
27.
Glue the rear wing brace to the trailing edge, making sure it is flush to the bottom of the trailing edges.
28.
Glue the larger of the laminated rectangles into place as shown in the image below making sure it is flush with the front and rear
wing braces. Make sure the center section is flat while gluing these into place! Glue the smaller laminated rectangles into place as
shown in the image below; making sure it is flush with the front wing brace.
29.
Glue the front and rear 1A ribs into place against the center blocks.
