![background image](http://html1.mh-extra.com/html/larson-electronics/epl-dl-24-12w-wf-24/epl-dl-24-12w-wf-24_assembly-manual_3719647003.webp)
EPL-DL-24-12W-WF.24
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
3
Explosion Proof Dock Fan/Light Combination
with Adjustable Arm - 24" Fan - 12W LED Lamp
Instruction Guide
Thank you for your purchase of the Larson Electronics
EPL-DL-24-12W-WF.24 Explosion Proof Dock Fan/Light
Combination with Adjustable Arm. This dock light / fan comes disassembled for shipping. See Assembly Guide for
assembling the unit. Please follow the steps below in order to operate and maintain this product.
IMPORTANT
READ CAREFULLY BEFORE OPERATING THIS UNIT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THE EPL-DL-24-12W-WF.24 MUST BE OPERATED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE AND
ALL APPLICABLE LOCAL CODES.
FOR PERSONAL SAFETY, ALWAYS CONFIRM THE RATING OF ANY KNOWN HAZARDOUS OR POTENTIALLY
HAZARDOUS LOCATION WHERE THE UNIT IS TO BE USED.
WARNING:
TO PREVENT IGNITION OF A HAZARDOUS ATMOSPHERE, THE SUPPLY CIRCUIT SHOULD BE
DISCONNECTED WHEN INSTALLING OR PERFORMING ANY MAINTENANCE ON THIS UNIT.
WARNING:
WHEN INSTALLING UNIT IN HAZARDOUS LOCATIONS, CHECK THE OPERATING TEMPERATURE
LIMITS PRIOR TO INSTALLATION TO BE SURE IT CONFIRMS TO THE ENVIRONMENTAL TEMPERATURE
RESTRICTIONS AND NEC CLASSIFICATIONS. CHECK THE NAMEPLATE FOR TEMPERATURE (T) RATINGS.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT USE ANY SOLID-STATE SPEED
CONTROL DEVICE WITH THESE FANS.
WARNING:
OPERATE FAN / LIGHT ONLY AT THE VOLTAGE OF YOUR SPECIFIC SUPPLY CIRCUIT.
WARNING:
SUBSTITUTE COMPONENTS MAY IMPAIR EXPLOSION PROOF SAFETY.
WARNING:
BEFORE SERVICING OR CLEANING THE UNIT, SWITCH THE POWER OFF AT THE SERVICE PANEL
AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
•
USING THIS PRODUCT FOR ANY OTHER PURPOSE THAN IT WAS INTENDED, OR NOT WITHIN THE
OPERATING SPECIFICATIONS IN THIS MANUAL WILL VOID THE WARRANTY AND MAY CAUSE DAMAGE TO
THE FAN / LIGHT OR SERIOUS INJURY TO PERSONNEL.
•
DO NOT EXPOSE FAN TO WATER OR RAIN.
OPERATION
Plan a way for mounting the dock light / fan. Place in a location where it can operate as intended. Ensure the
surface and hardware used are capable of supporting the weight. Ensure the fan will not come into contact
with water.
WIRING
CAUTION:
ALL ELECTRICAL WORK SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN AND MEET ALL
NATIONAL, STATE, AND LOCAL CODES.
Be sure the voltage and cycles shown on the motor nameplate correspond to the power supply. Check product
nameplate for Ratings and Approvals. This fan / light is rated for single phase 115V or 230V AC 60 Hz
operations based on model purchased.
CHECK VOLTAGE RATING PRIOR TO ENERGIZING.
Units pre-wired with 120V 3-prong power cord:
•
The power source must conform to the electrical requirements of the fan / light.
•
The power cord has a 3-prong grounded plug that must be plugged into a compatible circuit.
•
Do not alter the plug to remove the grounding prong and never use a two prong adapter.
•
Replace damaged or worn power cords immediately.
•
Where possible, avoid using extension cords. If one must be used, the cord must be UL listed, be the
proper size (Amp rating), and have 3-prong grounded connections.