SoundAdvisor Model 831C
Powering the 831C SLM
11
2.1.4 Preparing the 831C for Long Term Storage
The Hardware Power Switch on the bottom of the 831C disconnects the batteries from the
831C hardware. (For reference, see
.) The real-time clock maintains its value
while the switch is off. The power switch prevents battery drain when the meter is not in
use for an extended period of time. If you plan to store the meter for more than 2 weeks,
remove the batteries.
If the switch is in the “ 0 ” position, the batteries are disconnected. After installing
batteries be sure to move the switch to the “ | ” position.
CAUTION
DO NOT use the hardware power switch to turn the 831C OFF. Permanent
damage and data loss may occur. Press the
Power
button once, then select
Off
.
2.2 Powering the 831C SLM
In this section:
•
•
•
2.2.3 Understanding 831C Power Events and Indications
2.2.1 Using Battery Power
Current Battery Voltage is displayed on the Power Control page. To access the Power
Control page, press the
Power
button
0
.
In the Status Bar section of the meter display, the battery icon indicates the state of the
battery charge by the color and fill.
CAUTION
Do not mix different types of batteries. Only charge NiMH batteries.
CAUTION
Do not mix batteries from different manufacturers, replace all 4 batteries at
the same time.
CAUTION
When changing batteries, select the correct
Battery Type
in
System Prop-
erties
. See
9.4.1 Changing Batteries and Editing the Battery Type
.
CAUTION
Resolve a Session Log entry “Charging Stopped” by checking the batteries,
and ensuring the correct battery type is selected in
System Properties
.
Additionally, the battery may be too old to charge. Battery may also be read
as an incorrect battery type, which may happen to fully discharged NiMH
batteries. Use an external battery charger to restore charge, then install in
meter. Additionally, the batteries may be too hot or too cold.
Full Charge
Low Charge
Summary of Contents for 831C-FFT
