14
NOVA MIX 2K
English
•
E
Gun piping connection
Connect the tube (
F15
) of the gun (
F16
) to the connector of
the mixing group (
F17
).
F15
F16
F15
F17
Make sure that the connections are tightly sealed. It is recommen-
ded to use two wrenches to tighten them.
The machine is equipped with a connection plug (
F18
) that is to
be connected to the main switch (
F19
).
F18
F19
220V - 50Hz
CHECK ON POWER SUPPLY
Make sure that the system is properly grounded.
Use an electrical plug which guarantees the proper
grounding of the system.
DO NOT use thread pastes upon the connections.
It is recommended to use the tubes which have been
supplied along with the machine.
NEVER use a damaged or repaired flexible tube.
The machine requires a 220V alternating current
power supply.
LARIUS NOVA MIX 2K
equipment is fitted with an additional
external earth cable that is connected to the stem on the pump
unit be means of a specific clamp (
F20
), in order to protect the
operator against any risk of static or electric shock.
Should anyone use an extension cable between
the tooling and the socket, it must have the same
characteristics as the cable supplied (
minimum
diameter of the wire 4 mm
2
) with a maximum leng-
th of 50 mt. Higher lengths and lower diameters
can provoke excessive voltage falls and also an
anomalous working of the equipment.