20
NOVA MIX 2K
English
recirculation
recirculation
A
LARIUS NOVA MIX
OUTPUT GUN
PRODUCT A
CATALYSER B
GHIBLI
WASH
recirculation
B
L
A
B
L
FLOW
Flow diagram for the 2 components
Flow diagram for the wash fluid
• The fluid is drawn into the system by the wash pump.
• This pump ( GHIBLI ) filters the wash fluid before sending it
into the machine.
• The wash fluid through the nozzle located on the mixing block.
From there, they proceed to clean out the mixing line as well
as the tube containing the mixture of the 2 components.
Product tank
Wash fluid tank
Catalyser tank
Pump
Pump
Pump
Flow diagram for the 2 components
• The components are drawn from either external tanks or from
gravity tanks.
• The 2 pumps ( NOVA ) send the components to the NOVA
MIX 2K machine.
• In the NOVA MIX, the components flow through the pressure
gauge and the mixing group.
• The components then enter their respective nozzles located
on the mixing block. Based on the settings provided by the
machine, these regulate the passage of the materials in order
to obtain a proper mixture.
•
Along the length of the block and of the mixing tube, the 2
components are mixed together until they arrive perfectly
mixed at the spray-gun’s outlet.
- It is recommended to ALWAYS keep the cataly-
ser in part B of the circuit, both in the machine
as well as in the flow pump, and to use part A
exclusively for the product.
- Make sure that the wash fluid, whether water
or solvent based, is compatible with the two
components being utilized.
- If one or both of the components is changed,
perform a “complete” washing cycle in the NOVA
MIX 2K system.
