Advantages of use
Net and clear lines on any kind of pavement with
one coat only.
With a single coat the line is defined evenly: the line
made by airless spraying is linear, clean-cut and mar-
ked thanks to the flat cut nozzle and without the jagged
due to the turbulences caused by air.
Reduction of Over spray.
The airless operated marking guarantees the absence
of the classic "Overspray", that is the dispersion of paint
particles which is typical in the traditional air painting.
This translates, further than in a saving of paint, in a
better protection for health of the operator and for en-
vironment.
Saving of paint up to 30%.
Thanks to the absence of Overspray almost all of the
used product is applied on the surface without any wa-
ste.
Reduction of the vibrations.
The reduction of the vibrations ensures the best in indu-
stry quality of lines.
The paint dries quickly.
The airless operation requires that filtered paint specifi-
cally formulated for airless application is used, this me-
ans, by itself, even paint, smooth and uniform texture
which will not return any crust nor will become neither
jelly-like nor thick.
The paint holds tightly on any kind of pavement, with an
excellent visibility and resistance to wear caused both
by traffic and weather elements.
High quality paints guarantee a faster application
speed, a better durability of the visibility of the line and
a pleasant aesthetic result.
Reflective bead application.
Reflective beats can be applied using a gravity dispen-
ser operated by the same command which operates
Larius the ideal choice for achieving
professional performance.
the paint gun. The spheres automatically fall onto the
freshly marked line. No paints with pre-mixed beads
can be used.
50 litre non-stick hopper.
Thanks to the big capacity of the hopper marking times
are extended thanks to the absence of frequent inter-
ruptions to perform colour changes.
Template works and curved marking.
The gun can be released from its support in just a few
seconds and, thanks to the 10 meters pipe it is con-
nected to, it allows any template work, on walls as well.
The front wheel helps to mark lines close to the kerb
and to mark arches and curves.
Intuitive use by the operator.
The operator commands are located right on the
handlebar to adjust the operation of the line marker in
the most handy way.
Optional equipment.
Airless line markers can be equipped basing on the dif-
ferent needs of the operator for offering a dedicated
solution for any marking need.
Easy cleaning and maintenance.
Cleaning airless line markers is quick thanks to the
absence of pressurized tanks to be cleaned and thus
colour change times are extremely short both if using
the can or the non stick paint tank. The high pressure of
the airless line marker clears the spraying area from dirt
and so it does not require that the ground is previously
cleaned.
A regular cleaning at the end of the work is sufficient to
keep the machine in perfect efficiency, even after pro-
longed standing periods.
The Larius Super Fast Clean airless nozzles allow that
the nozzle is cleaned with a simple rotating movement,
without any need to detach it.
WELL PROVEN TECHNICAL QUALITY FOR ANY ON-GROUND
MARKING APPLICATION
The LARIUS airless line markers successfully join product performan-
ce with operator requirements and allow the marking and the mainte-
nance of any kind of pavement lines on roads, motorways, airports,
pedestrian crossings, cycle paths, yards and wherever is required by
the Highway Code with regards to horizontal road signs, guaranteeing
perfect lines on different surfaces.
The airless technology provides the high pressure spraying of the paint
through a nozzle having centesimal dimensions as compared to the
traditional low pressure spraying in which the paint flow is atomized
through the air contribution.
YOUR PARTNER FOR ALL YOUR MARKING NEEDS SINCE 1969
Paint spraying equipment
Summary of Contents for DALI LINER PLUS HAND PUSH
Page 2: ......
